Video Channels Are Back - Sign Up+Upload+Share

Login / Register

"Antigravity" Method 12 of 15, Electromagnetic Fields DC Pulse, AC LF, & HF Group IIIBii

Thanks! Share it with your friends!


You disliked this video. Thanks for the feedback!

Sorry, only registred users can create playlists.

Added by Admin in


GROUP III ELECTROMAGNETIC-AC Oscillating electromagnetic fields
Filmed 1991-1996, 11 of 15 methods of levitating an object known to the author John Iwaszko, edited from the video Antigravity the reality made in 1996. The antigravity method shown in this edit, was introduced and was referred to as Magnetic Pulse Propulsion which has now been reclassified by the author as Electromagnetic AC Group IIIB ii) Electrodynamic Suspension (EDS)-Induced currents/Eddy currents- Oscillating electromagnetic Fields- DC Pulse, AC (LF, & HF)
The 12th Method of antigravity is achieved in a very similar way to that of the previous method 11 but instead of mechanically inducing Relative motion between conductors and magnets, relative motion is induced by time varying currents of electricity generally referred to as alternating currents or AC.
The simple experiment showed that if we raise a magnet away from a conducting loop of wire, the movement of the magnet generates a current through the loop in this direction that it opposes the change of the Magnetic field in the upward direction then the coil will produce a magnetic field in the opposing direction attracting the magnet. If we reverse the situation and push the magnet towards the coil the current will reverse in the loop and the magnetic field repelling the magnet. This is shown here demonstrating that a magnet can push a ring of non ferrous aluminium away by relative motion and that the effect is also reduced when the ring is open circuit. We can use this general principle to create levitation or negative gravity that generally pushes conductors away but can also be made stable by various means other than pivoting or tethering which we will now discuss.
WARNING:- Some of these experiments operate directly from 240VAC mains supply or far higher voltages at high currents are potentially lethal. Do not build unless you know exactly what you are doing. Do not touch any part of the equipment while it is plugged into a mains outlet. And remember that the methods described do not conform to any electrical safety standard and many of the experiments performed are downright dangerous.
Powerful magnets such as neodymium magnets or powerful magnetic fields generated by coils can be dangerous and not to be played with. Powerful magnets or magnetic fields can crush fingers. The power of magnetism can also cause chunks of metal to take flight and cause injury to body parts and or blindness.
Rotating machinery can pose a danger from rotating or reciprocating parts. Particularly when machine parts move toward each other, or one part moves past another, which can crush limbs.
Extremely intense sounds can burst ear drums or can be physically painful to human ears. High-intensity ultrasound waves are extremely dangerous to experiment with as they can heat human eyes or other tissue by absorbing ultrasound energy which becomes heat by vibration and corresponding energy loss.
Exposure to radio frequency energy or ionizing radiation that can be generated by coils can not only burn as they get hot but also cause radiation burns, damage to the skin or other biological tissue.
Direct skin contact with liquid nitrogen will cause severe frostbite (cryogenic or cold burns). This may happen almost instantly on contact, there is always a potential hazard when handling liquid nitrogen.
Be careful! Use good solid judgement in your work, and think ahead. I John Iwaszko do not endorse the experiments shown, and am merely passing on information, I have learnt through experiment. Safety is your responsibility!

Post your comment


Be the first to comment