Biefeld-Brown effect testing via Bipolar Tesla Coil part 2

55 Views
Published
Testing some of the properties of the Biefled-Brown effect. Change the voltage level by increasing the spark gap. Using plastic to interrupt the dielectric to adjust flight characteristics. Added one module. Flash occurs regardless of 12cm distance. Diodes and Capacitor are rated for 80 KV. High voltage probe only rated for 40KV. Readings are questionable because the flashing based on the thumb rule is 10KV per cm. So flashing over 10cm would be 100KV?? You do the math. Lookup the Bi-Polar coil in action. I used 8 spark gaps and flash over 50 cm. Music is used with permission from WingMakers.com, All Rights Reserved. Song: AA Chamber 8
Be the first to comment