Diy Tesla Powerwall ep57 Fuse Checking!

This is going to be my version of the Tesla Powerwall. Ill start with 10kw at 48v (100p14s) and will add more packs as time goes on to increase the capacity. I plan to store everything in a Short Server Cabinet and It will be a Power Rack!!! Subscribe and follow my build!!!

This Update I am Re-checking all the fuses to see if any are broken, bad solder connections and or not soldered at all. I found about 10 fuses that were broken on the positive end from connecting and disconnecting the Anderson Plugs. After replacing the fuses I also wrapped the positive end with some Kapton Tape to help secure the buss bars from moving.

Be the first to comment