Featured

EV Conversion Guide Part 15 -------- Electric Motor & Adapter Plate-- Drilling The Holes

138 Views
Published
Using a Drill Press works the best. Also, not recommended to skimp on drill bits. Get a couple quality bits, that will drill ALL your holes. If you get cheap junk bits, you may use 10-20 to drill one hole, instead of 1-2 bits to drill 10-20 holes. And Higher quality bits can be successfully re-sharpened so they can continue to be used (I've been using the same set of drill bits for 5 years now)
Try not to go larger then needed for the holes. Match the size bit & bolts for mounting, to the size mounting holes on the transmission.
IMPORTANT!!! USE ONLY GRADE 8 or ABOVE BOLTS FOR MOUNTING THE MOTOR!

Part 16: Installing Drive-train -- Reinstalling the Transmission http://youtu.be/jNz2GXnoksk


Thank You for Purchasing our EV Conversion Guide. We hope our added videos will help you with your conversion. If you have any questions, please do not hesitate to contact us!

Customs Unlimited / K-Man Scooters & Electric Cars
Wisconsin's First Dealer of 100% Electric DOT Licensed Electric Cars, Trucks, Motorcycles & SUV's
http://KmanScooters.com
http://MidwestScooterParts.com
414-852-7526
islandbayy@yahoo.com

-~-~~-~~~-~~-~-
Please watch: "Tesla Accident-Car Summoned into Semi Trailer--- How It Most Likely Happened! Tesla Autopilot Crash"
https://www.youtube.com/watch?v=IQyrPXPKvlI
-~-~~-~~~-~~-~-
Be the first to comment