The Results are in!! Progress is being
In these next six videos I am comparing plate spacing. I have two cells exactly the same except the spacing...Parts 1, 3 and 5 are spaced at 0.050" ...Parts 2, 4 and 6 are spaced at 0.025" ...Plate cofiguration is +nnnnn-nnnnn+ ...KOH solution was made and divided equally.
An interesting thing to note is the
Voltage, being supplied by the charger, is more when the larger plate spacing cell is being tested...the Amps are fixed at 7.00Amps...the larger space creates more resistance. And as the water tempurature rises the voltage required is less.
Also notice the gas saturation with the larger spaced cell. The narrower spacing produces larger bubbles...so they rise to the surface and pop rather than get recirculated back down into the solution, which would affect production.
I think I made a mistake on the stop time on the first test...I stopped it at the wrong water level on the measuring device.
Anyway please watch and enjoy.
As always your comments are welcome.
P.S. Part 2-6 will be up shortly.