How to build a Waste oil Burner for heating, scrapping or aluminium melting

Building a simple Waste oil Burner to run on used Vegetable WVO or motor oil. Please like, share and see the other vids on my channel.
This video shows step by step how easy it is to construct a waste oil burner capable of Burning any flammable liquid. For the safety zealots and assorted whingers, this is a vid on how to build a waste oil burner, not how to weld or use the tools. Please only comment on this if you have a vid of your own to demonstrate how you do things different.

The burner is made from an old fire extinguisher bottle and some old exhaust pipe. The waste oil inlet was a bit of metal fuel line I hacked out of a scrap car body. The burner as shown is simply 2 holes cut in the bottle and the 2 pieces of exhaust cut and welded in. a hole is drilled in the inlet pipe and the metal fuel line is inserted and the oil is simply blown in with the air.
The dimensions of the individual components are unimportant as the design is very tolerant. All that neds to be borne in mind is there needs to be some swirling of the air inside of the burner and to pre heat it.

Please feel free to comment or hit the like button if you found the video helpful.
Be the first to comment