How to hook up Solar Panels (with battery bank) - simple 'detailed' instructions - DIY solar system
shows how to hook up solar panels (with a battery bank). simple instructions. home solar power station. very easy to put together. all you need is 1 or more batteries, an inverter, charge controller and a solar panel or panels. the following is for a 12 volt system. use one 'deep cycle' battery for every 2 to 6 amps your panels generate. (batteries like to be charged at this rate). a 12 volt 1 amp panel generates about 15 watts. you can use any solar panels. if you can't get the smaller panels then buy one larger one. (Kyocera sells an inexpensive 7-8 amp solar panel (135 watter)). that would go perfect with 2 deep cycle batteries. the six panels in the video are from harbor freight tools. i bought 2 three panel sets. they sell the panels in sets of three or individually. coleman sells similar panels. the batteries are from walmart. they are 'deep cycle' batteries. the charge controller is from fry's electronics. the inverter is from harbor freight tools. this system will provide all the 'free' power you will need to run tons of things around your house. i've posted 6 videos showing all sorts of things running on this system (computers, tvs, stereos, lights, power tools, appliances, and more). all can be found on my youtube channel homepage. great little system to start with. try 'powering up' one room in your house. you now have a solar assisted house. as one example; this could easily run a light, laptop computer, fan and small tv for several hours every day. also great in an emergency, power outage, remote and rural off-grid living.