Micro Tesla Turbine MK2 | Part3 | Finishing and Testing

Don't Forget To - LIKE | SUBSCRIBE | SHARE

This is the last of the three part series of building a micro Tesla turbine. It was exteremely challenging just to make it spin at these speeds with almost no clearence from the end caps and the housing. It didn't perform as I was hoping, but in the future I plan to do some updates on this one to see its real potential. The biggest problem is the fact that I never managed to balance it properly as I do not own any equipment for that. It's performace would be different, especially if the output shaft was geared. For those who will ask why I used the faulhaber brushless dc motor as generator is because it's very smooth when rotated and the vibrations which was a lot from the turbine alone wouldn't increase.

Support my videos!: https://www.patreon.com/johnnyq90

Subscribe to my channel! https://www.youtube.com/user/johnnyq90

Follow me on Vessel and watch my video earlier! https://www.vessel.com/channels/johnnyq90

Follow me on Google+ https://plus.google.com/u/0/b/104633881118655653159/104633881118655653159/posts

Follow me on Twitter! https://twitter.com/JohnnyQ90

Music by TheFatRat ("Xenogenesis”)
Licenced by Tasty http://youtube.com/tasty
Be the first to comment